SIP User's Manual 70 Document #: LTRT-65412
MP-11x & MP-124
3.3.2.2 Configuring the Fax/Modem/CID Settings
The 'Fax/Modem/CID Settings' page is used for configuring fax, modem, and Caller ID
(CID) parameters. For a detailed description of the parameters appearing on this page,
refer to “Configuration Parameters Reference” on page 213.
¾ To configure the fax, modem, and CID parameters:
1. Open the 'Fax/Modem/CID Settings' page (Configuration tab > Media Settings menu
> Fax/Modem/CID Settings page item).
Figure 3-43: Fax/Modem/CID Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
3.3.2.3 Configuring the RTP/RTCP Settings
The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed
description of the parameters appearing on this page, refer to “Configuration Parameters
Reference” on page 213.
To Next Page
Loading...
