Version 5.8 71 September 2009
SIP User's Manual 3. Web-Based Management
¾ To configure the RTP/RTCP parameters:
1. Open the 'RTP/RTCP Settings' page (Configuration tab > Media Settings menu >
RTP / RTCP Settings page item).
Figure 3-44: RTP/RTCP Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
3.3.2.4 Configuring the General Media Settings
The 'General Media Settings' page allows you to configure various media parameters. For a
detailed description of the parameters appearing on this page, refer to “Configuration
Parameters Reference” on page 213.
¾ To configure general media parameters:
1. Open the 'General Media Settings' page (Configuration tab > Media Settings menu >
General Media Settings page item).
Figure 3-45: General Media Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
To Next Page
Loading...
