SIP User's Manual 92 Document #: LTRT-65412
MP-11x & MP-124
3.3.4.2 Protocol Definition
The Protocol Definition submenu allows you to configure the main SIP protocol
parameters. This submenu contains the following page items:
SIP General Parameters (refer to ''SIP General Parameters'' on page 92)
DTMF & Diali
ng (refer to ''DTMF & Dialing Parameters'' on page 93)
3.3.4.2.1 Configuring SIP General Parameters
The 'SIP General Parameters' page is used to configure general SIP parameters. For a
description of the parameters appearing on this page, refer to “Configuration Parameters
Reference” on page 213.
¾ To configure the general SIP protocol parameters:
1. Open the 'SIP General Parameters' page (Configuration tab > Protocol
Configuration menu > Protocol Definition submenu > SIP General Parameters
page item).
Figure 3-58: SIP General Parameters Page
To Next Page
Loading...
