AudioCodes MP-124 - Configuring Media Security; Configuring the Hook-Flash Settings; Figure 3-46: Hook-Flash Settings Page; Figure 3-47: Media Security Page

SIP User's Manual 72 Document #: LTRT-65412
MP-11x & MP-124
3.3.2.5 Configuring the Hook-Flash Settings
The 'Hook-Flash Settings' page allows you to configure hook-flash parameters. For a
detailed description of the parameters appearing on this page, refer to “Configuration
Parameters Reference” on page 213.
¾ To configure the Hook-Flash parameters:
1. Open the 'Hook-Flash Settings' page (Configuration tab > Media Settings menu >
Hook-Flash Settings page item).
Figure 3-46: Hook-Flash Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
3.3.2.6 Configuring Media Security
The 'Media Security' page allows you to configure media security. For a detailed description
of the parameters appearing on this page, refer to “Configuration Parameters Reference”
on page 213.
¾ To configure media security:
1. Open the 'Media Security' page (Configuration tab > Media Settings menu > Media
Security page item).
Figure 3-47: Media Security Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.