Version 5.8 171 September 2009
SIP User's Manual 3. Web-Based Management
3.4.2.1.2 Loading Auxiliary Files using ini File
You can also load the auxiliary files using the ini file (loaded to the device using BootP).
Each auxiliary file has a specific ini file parameter that specifies the name of the auxiliary
file that you want to load to the device. For a description of these ini file parameters, refer to
''Configuration Files Parameters'' on page 360.
¾ To load the auxiliary files using an ini file:
1. In the ini file, define the auxiliary files to be loaded to the device. You can also define in
the ini file whether the loaded files must be stored in the non-volatile memory so that
the TFTP process is not required every time the device boots up.
2. Save the auxiliary files and the ini file in the same directory on your local PC.
3. Invoke a BootP/TFTP session; the ini and associated auxiliary files are loaded to the
device.
To Next Page
Loading...
