Version 5.8 211 September 2009
SIP User's Manual 5. Element Management System (EMS)
2. Click the Add File
icon; the 'Add Files' dialog box appears.
Figure 5-11: Add Files Screen
3. Select the cmp file, by performing the following:
a. Ensure that the CMP File Only option is selected.
b. In the 'CMP' field, click the browse button and then navigate to and select the
required cmp file; the software version number of the selected file appears in the
'Software Version' field.
c. From the 'Major Version' drop-down list, select the version number of the cmp file.
d. From the 'Select Product' drop-down list, select the type of device.
e. From the 'Select Protocol' drop-down list, select the the control protocol (i.e., SIP).
4. Click OK.
5. In the MG Tree, select the device that you want to upgrade.
To Next Page
Loading...
