AudioCodes MP-124 - Page 270

SIP User's Manual 270 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
IP Group Table
[IPGroup]
This ini file table parameter configures the IP Group table.
The format of this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable,
IPGroup_RoutingMode, IPGroup_SRD,
IPGroup_MediaRealm, IPGroup_ClassifyByProxySet,
IPGroup_ProfileId;
[\IPGroup]
For example:
IPGroup 1 = 0, "dol gateway", 1, firstIPgroup, , 0, -1, 0, 0, -
1, 0, , 1, 1;
IPGroup 2 = 0, "abc server", 2, secondIPgroup, , 0, -1, 0, 0,
-1, 0, , 1, 2;
IPGroup 3 = 1, "IP phones", 1, thirdIPGroup, , 0, -1, 0, 0, -1,
0, , 1, 2;
Notes:
 This table parameter can include up to 9 indices (1-9).
 The parameters IPGroup_Type,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_RoutingMode, IPGroup_SRD,
IPGroup_MediaRealm, and
IPGroup_ClassifyByProxySet are currently not
applicable and must be left empty (or -1).
 For a detailed description of the ini file table's
parameters and for configuring this table using the Web
interface, refer to ''Configuring the IP Groups'' on page
99.
 For an explanation on using ini file table parameters,
refer to ''Format of ini File Table Parameters'' on page
191.