SIP User's Manual 272 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
Account Table
[Account]
This ini file table parameter configures the Account table for
registering and/or authenticating (digest) Hunt Groups (e.g.,
an IP-PBX) to a Serving IP Group (e.g., an Internet Telephony
Service Provider - ITSP). The format of this parameter is as
follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password,
Account_HostName, Account_Register,
Account_ContactUser, Account_ApplicationType;
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Notes:
This table can include up to 10 indices (where 1 is the first
index).
The parameter Account_ApplicationType is not applicable.
The parameter Account_ServedIPGroup is not applicable.
You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups,
username, password, HostName, and ContactUser. This
provides the capability for registering the same Hunt Group
to several ITSP's (i.e., Serving IP Groups).
For a detailed description of this table's parameters and for
configuring this table using the Web interface, refer to
''Configuring the Account Table'' on page 102.
For an explanation on using ini file table parameters, refer
to ''Format of ini File Table Parameters'' on page 191.
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Enables the use of a SIP Proxy server.
[0] No = Proxy isn't used - the internal routing table is used
instead (default).
[1] Yes = Proxy is used. Parameters relevant to Proxy
configuration are displayed.
If you are using a Proxy server, enter the IP address of the
Proxy server in the 'Proxy Sets table' (refer to ''Configuring the
Proxy Sets Table'' on page 95). If you are not u
sing a Proxy
server, you must configure the device's 'Tel to IP Routing'
table (described in ''Configuring the Tel to IP Routing Table''
on page 131).
Web/EMS: Proxy Name
[ProxyName]
Defines the Home Proxy Domain Name. If specified, the Proxy
Name is used as the Request-URI in REGISTER, INVITE, and
other SIP messages, and as the host part of the To header in
INVITE messages. If not specified, the Proxy IP address is
used instead.
The value must be string of up to 49 characters.
To Next Page
Loading...
Need help?
General
