AudioCodes MP-124 - Page 287

Version 5.8 287 September 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
MWI Source Number
[MWISourceNumber]
Determines the calling party's phone number used in the Q.931 MWI
SETUP message to PSTN. If not configured, the channel's phone
number is used as the calling number.
Digit Patterns The following digit pattern parameters apply only to voice mail applications that use the
DTMF communication method. For the available pattern syntaxes, refer to the CPE Configuration
Guide for Voice Mail.
Forward on Busy Digit
Pattern (Internal)
[DigitPatternForwardOnB
usy]
Determines the digit pattern used by the PBX to indicate 'call forward
on busy' when the original call is received from an internal extension.
The valid range is a 120-character string.
Forward on No Answer Digit
Pattern (Internal)
[DigitPatternForwardOnN
oAnswer]
Determines the digit pattern used by the PBX to indicate 'call forward
on no answer' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Forward on Do Not Disturb
Digit Pattern (Internal)
[DigitPatternForwardOnD
ND]
Determines the digit pattern used by the PBX to indicate 'call forward
on do not disturb' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Forward on No Reason Digit
Pattern (Internal)
[DigitPatternForwardNoRe
ason]
Determines the digit pattern used by the PBX to indicate 'call forward
with no reason' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Forward on Busy Digit
Pattern (External)
[DigitPatternForwardOnB
usyExt]
Determines the digit pattern used by the PBX to indicate 'call forward
on busy' when the original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
Forward on No Answer Digit
Pattern (External)
[DigitPatternForwardOnN
oAnswerExt]
Determines the digit pattern used by the PBX to indicate 'call forward
on no answer' when the original call is received from an external line
(not an internal extension).
The valid range is a 120-character string.
Forward on Do Not Disturb
Digit Pattern (External)
[DigitPatternForwardOnD
NDExt]
Determines the digit pattern used by the PBX to indicate 'call forward
on do not disturb' when the original call is received from an external
line (not an internal extension).
The valid range is a 120-character string.
Forward on No Reason Digit
Pattern (External)
[DigitPatternForwardNoRe
asonExt]
Determines the digit pattern used by the PBX to indicate 'call forward
with no reason' when the original call is received from an external line
(not an internal extension).
The valid range is a 120-character string.
Internal Call Digit Pattern
[DigitPatternInternalCall]
Determines the digit pattern used by the PBX to indicate an internal
call.
The valid range is a 120-character string.
External Call Digit Pattern
[DigitPatternExternalCall]
Determines the digit pattern used by the PBX to indicate an external
call.
The valid range is a 120-character string.