AudioCodes MP-124 - Page 307

Version 5.8 307 September 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined for
IP Profiles per call (using the parameter IPProfile).
[MLPPFlashRTPDSCP]
Defines the RTP DSCP for MLPP Flash precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined for
IP Profiles per call (using the parameter IPProfile).
[MLPPFlashOverRTPDSCP]
Defines the RTP DSCP for MLPP Flash-Override precedence
call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined for
IP Profiles per call (using the parameter IPProfile).
[MLPPFlashOverOverRTPDSCP]
Defines the RTP DSCP for MLPP Flash-Override-Override
precedence call level.
The valid range is -1 to 63. The default is -1.
Note: If set to -1, the DiffServ value is taken from the global
parameter PremiumServiceClassMediaDiffServ or as defined for
IP Profiles per call (using the parameter IPProfile).
[E911MLPPBehavior]
Defines the E911(or Emergency Telecommunication Services -
ETS) MLPP Preemption mode:
 [0] Standard Mode - ETS calls have the highest priority
(default).
 [1] Treat as routine mode - ETS calls are handled as routine
calls.