EasyManua.ls Logo

AudioCodes MP-124 - Page 383

AudioCodes MP-124
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 5.8 383 September 2009
SIP User's Manual 9. IP Telephony Capabilities
3. Assign the different tag prefixes to different Trunk Groups in the 'IP-to-Hunt Group
Routing' table:
The 'Dest. Phone Prefix' field is set to the value "LOCL" and this rule is assigned
to a local Trunk Group (e.g. Trunk Group ID 1).
The 'Dest. Phone Prefix' field is set to the value "LONG" and this rule is assigned
to a long distance Trunk Group (e.g. Trunk Group ID 2).
Figure 9-2: Configuring Dial Plan File Label for IP-to-Tel Routing
The above routing rules are configured to be performed before manipulation
(described in the step below).
4. Configure manipulation in the 'Destination Phone Number Manipulation Table for IP to
Tel Calls' table for removing the first four characters of the called party number “tag” (in
our example, "LOCL" and "LONG"):
The 'Destination Prefix' field is set to the value "LOCL" and the 'Stripped Digits
From Left' field is set to '4'.
The 'Destination Prefix' field is set to the value "LONG" and the 'Stripped Digits
From Left' field is set to '4'.
Figure 9-3: Configuring Manipulation for Removing Label

Table of Contents

Other manuals for AudioCodes MP-124

Related product manuals