AutomationDirect DL205 User Manual

DL205 User Manual, 4th Edition, Rev. D
5-134
Chapter 5: Standard RLL Instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Binary to Real Conversion (BTOR)
The Binary-to-Real instruction converts a binary value in the
accumulator to its equivalent real number (floating point)
format. The result resides in the accumulator. Both the binary
and the real number may use all 32 bits of the accumulator.
NOTE: This instruction only works with unsigned binary, or decimal values. It will not work with signed
decimal values.
In the following example, when X1 is on, the value in V1400 and V1401 is loaded into the
accumulator using the Load Double instruction. The BTOR instruction converts the binary
value in the accumulator the equivalent real number format. The binary weight of the MSB
is converted to the real number exponent by adding it to 127 (decimal). Then the remaining
bits are copied to the mantissa as shown. The value in the accumulator is copied to V1500
and V1501 using the Out Double instruction. The Handheld Programmer would display the
binary value in V1500 and V1501 as a HEX value.
BTOR
48AE 4820
V1500V1501
LDD
V1400
X1
Load thevalue in V1400 and
V1401 into theaccumulator
BTOR
Convertthe binaryvalue in
theaccumulatortothe real
number equivalent format
0 1110010001000010 000000000000101
8 4218421842184218 421842184218421
Acc.
0 005 7241
V1400V1401
BinaryValue
Copy thereal valueinthe
accumulatortoV1500 and V1501
OUTD
V1500
Thereal num ber(HEX) value
copied to V1500
0 0101000001000000 100100010101110Acc.
Real Number Format
Mantissa (23bits)Exponent (8 bits)Sign Bit
2(exp 18)
127 +18=145
145 = 128 +16+1
STR
$
SHFT
ANDST
L
3
D
3
D
SHFT
1
B
MLR
T
ORN
R
ENT
OUT
GX
SHFT
3
D
1
B
ENT
INST#
O
ENT
1
B
4
E
0
A
0
A
ENT
1
B
5
F
0
A
0
A
Handheld Programmer Keystrokes
DirectSOFT




230
240
250-1
260
Discrete Bit Flags Description
SP63 On when the result of the instruction causes the value in the accumulator to be zero
SP70 On anytime the value in the accumulator is negative
DS Used
HPP Used

AutomationDirect DL205 Specifications

General

Brand	AutomationDirect
Model	DL205
Category	Controller
Language	English