Avaya J100 Series - Page 127

Settings field descriptions
Settings
Name Description
Language
Available Language File Specifies the name of the default system language file used in
the phone.
You can delete the default language file by clicking Delete.
Import Language File Browse and import a language file from your local machine by
clicking Browse > Import.
Language file to upload Specifies the language files to be installed on the phone.
Filenames can be full URL, relative pathname, or filename
comma separated filenames ending with .xml. The default
value is empty.
Phone Language Specifies the language used in phone system.
Value format: complete language file name from 0 to 32
characters, for example: Korean.xml.
The default value is empty.
Feature Access
Call Forward Specifies the status of the Call Forwarding feature.
The options are:
• Off (default)
• Unconditional
• Busy
• Unconditional and Busy
• No answer
• Unconditional and No answer
• Busy and No answer
• Unconditional, No answer and Busy
Number of Ring cycle before Call
Forward
Specifies the number of ring cycles before the call is forwarded.
The valid value is an integer from 0 to 20. The default number
of ring cycles is 1.
Do Not Disturb Specifies the status of the Do Not Disturb feature.
The options are:
• Do Not Allow
• Allow (default)
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 127
Comments on this document? infodev@avaya.com