Name Description
Shortcut action Autodial Specifies the shortcut action performed by activating the
Autodial line during an active call or, in case of Call Park, during
an active or a held call.
Using Autodial line keys as shortcuts is available only in the
Broadworks environment.
The options are:
• Call to Autodial destination (default)
• Transfer to Autodial destination
• Blind transfer to Autodial destination
• Conference to Autodial destination
• Park to Autodial destination
Call park shortcut action is available only in the Broadworks
environment.
Call Decline policy Specifies whether the user can decline the incoming call. You
can enable and disable the feature using the following options:
The options are:
• Disabled (Default)
• 486 method: By selecting this value you enable the Call
decline policy for the user. 486 method indicates that the call
ringing location is not available to take the call.
However, the ringing continues in other locations.
• 603 method: By selecting this value you enable the Call
decline policy for the user. 603 method indicates that no
location is available to take the call.
Shortcut action BLF Park Specifies the way parking a call is performed when the Shared
Parking line is activated during an ongoing call.
The options are:
• Blind transfer to BLF Park destination (default)
• Dial Park FAC + BLF Park destination: this option might not
be available in all the environments.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 130
Comments on this document? infodev@avaya.com
To Next Page
Loading...
