Avaya J100 Series - Page 131

Name Description
Call Park Dynamic and Page Specifies whether the Park and Page feature is available to the
user. This feature requires that the
CALL_PARK_DYNAMIC_FAC code and
CALL_PARK_DYNAMIC_METHOD are defined in order to
park the call.
The options are:
• Disable
• Enable
If Call Park Dynamic and Page is disabled, Call Park Dynamic
Method, Call Park Dynamic FAC, Call Page Extension FAC,
Call Paging Group and Call Page Group FAC are grayed out.
The default value is Disable.
Call Park Dynamic Method Specifies the method to initiate the Park Dynamic feature.
The options are:
• Blind transfer: The active call is blind transferred to the
CALL_PARK_DYNAMIC_FAC
• DTMF: Provide the CALL_PARK_DYNAMIC_FAC digits into
the active call.
The default value is Blind transfer.
Call Paging Groups Specifies a comma separated list of paging groups a user is
allowed to call. PagingGroupLabel:PagingGroupAddress —
PagingGroupLabel is a string describing the
PagingGroupAddress. PagingGroupAddress is the address or
number of the PagingGroupLabel.
PagingGroupLabel can be of 32 unicode characters and
PagingGroupAddress can be of 64 unicode alphanumeric
characters, an extension, an address or sip
uri.PagingGroupLabel and PagingGroupAddress can not
contain: ;",=|<>/&. For example : TechSupport:34299,Sales:
34277
The default value is null.
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 131
Comments on this document? infodev@avaya.com