Name Description
Prioritize incoming calls Specifies if visual display of incoming alerts are to be sorted
when there is more than one or if they should be displayed in
the order they are received. Incoming alerts can include (in
priority order): incoming calls, calls parked to the user's
extension, incoming calls to a monitored BLF key, calls parked
to a monitored BLF key.
The options are:
• Disable: sort the list of incoming alerts in the order they are
received.
• Enable: sort the list of incoming alerts by priority.
The default value is null.
Keep current CA Specifies whether the selected line on the phone screen will
remain selected if the line is a call appearance with a call that is
just ended. The call can be on a primary call appearance, a
bridged call appearance or a shared call appearance.
The options are:
• Disable: select a higher priority call or reset to select the first
line if the phone is idle.
• Enable: keep the current line selection.
The default value is null.
Phone screen mode Specifies the default layout of the main phone screen. Also
specifies if the user can change the layout or not. This option is
available only in Open SIP environment.
The options are:
• Full-user adjustable
• Half-user adjustable
• Half-locked
• Full-locked
Scrolling mode Specifies the scrolling mode on the Phone and Feature
screens.
The options are:
• Line scrolling (Default): the user can navigate by using the
phone Up and Down navigation keys to select the previous or
next line is selected. User can use the left and right navigation
keys to select another column in dual screen mode.
• Page scrolling: the user can use the left and right navigation
keys to switch between the previous and next page.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 132
Comments on this document? infodev@avaya.com
To Next Page
Loading...
