Name Description
Emergency Softkey Specifies whether the Emergency soft key is displayed after
the phone is registered.
The options are:
• Do Not Display
• Display without Confirmation
• Display with Confirmation (default)
Softkey Emergency Number Specifies the number(s) which is dialed when the Emergency
soft key is pressed.
The valid value is up to 30 dialable characters. The default
value is empty.
Value format: digits from 0 to 9, *, #.
Emergency Softkey on
Unregistration
Specifies whether the Emergency soft key is displayed when
the phone is not registered.
The options are:
• Do Not Display
• Display without Confirmation
• Display with Confirmation (default)
Phone Lock
Enable Phone Lock Specifies whether the Lock feature is enabled on the phone.
The options are:
• Do Not Allow (default)
• Allow
Phone Lock Idle Time Specifies the idle time in minutes after which the phone is
locked.
The valid value is an integer from 0 to 10080. The default value
is 0 minutes.
Count of PIN/password attempts Specifies the number of failed attempts that you can permit to
unlock the phone. After the user exceeds the permitted limit, the
user is blocked from attempting again for a specified time.
The numeric value ranges between 0–20.
If you set the value to 0, the user will not be blocked for the
failed attempts to unlock the phone.
Phone PIN/password lock time Specifies the time period when the user will be blocked from
attempting to unlock the phone.
The numeric value ranges between 5–1440 minutes.
The default value is 5 minutes.
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 139
Comments on this document? infodev@avaya.com
To Next Page
Loading...
