Name Description
Phone Lock PIN Specifies the PIN that you can set to unlock the phone.
The PIN must be only digits with the value ranging from 4–20
characters.
The default value is null.
Other
Softkey Configuration Specifies which feature will show up on which soft key on the
phone screen.
This setting applies only to Avaya J129 IP Phone.
The following numbers are assigned to the features:
• 0 – Redial
• 1 – Contacts
• 2 – Emergency
• 3 – Recents
• 4 – Voicemail
Value format: numbers from 0 to 4 and a comma (,).
The default value is “0,1,2”.
Branding Volume Specifies the volume level at which the Avaya audio brand is
played.
The options are:
• 12db below nominal
• 9db below nominal
• 6db below nominal
• 3db below nominal
• Nominal (default)
• 3db above nominal
• 6db above nominal
• 9db above nominal
Phone Mute Alert Specifies whether the Mute Alert feature is blocked.
The options are:
• Unblocked
• Blocked (default)
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 140
Comments on this document? infodev@avaya.com
To Next Page
Loading...
