Avaya J100 Series Installing And Administering

• Firmware
• Backup/Restore User Data
• Updates
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Management settings field descriptions
Name Description
Device Enrollment Service
DES Discovery Specifies the DES Discovery mode.
The options are:
• Enable (default)
• Disable
• Disable and Restored with Reset to Default
Embedded Public Certificates Specifies whether to trust the embedded public
certificates.
The options are:
• Trusted only if Trustcerts is empty (default)
• Always Trusted
HTTP Provisioning Server
HTTP Server Address Specifies the IP address of the provisioning file
server.
The valid value is the IP address in the dotted
decimal name format, DNS name format, or colon-
hex.
The default value is 0.0.0.0.
HTTP Server Directory Path Specifies the path to the configurations and data
files in HTTP and HTTPS GET operations during
device bootup. This path is relative to the root of the
HTTPS file server, to the directory in which the
device configuration and date files are stored. If
$MACADDR and/or $MODEL4 and/or $SERIALNO
macro is present in the configured path then such
macro is replaced with its actual value.
The valid value is a string of up to 127 ASCII
characters without spaces. This field is empty by
default.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 152
Comments on this document? infodev@avaya.com

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)