Name Description
HTTP Port Specifies the HTTP port address.
The valid value is an integer from 0 to 65535. The
default port number is 80.
HTTPS Provisioning Server
HTTPS Server Address Specifies the IP address of the HTTPS provisioning
file server.
The valid value is the IP address in the dotted
decimal name format, DNS name format or colon-
hex.
The default value is 0.0.0.0.
HTTPS Server Directory Path Specifies the path to the configurations and data
files in HTTPS GET operations during device
bootup. This path is relative to the root of the
HTTPS file server, to the directory in which the
device configuration and date files are stored. If
$MACADDR and/or $MODEL4 and/or $SERIALNO
macro is present in the configured path then such
macro is replaced with its actual value.
The valid value is a string of up to 127 ASCII
characters without spaces. This field is empty by
default.
HTTPS Port Specifies the HTTPS port address.
The valid value is an integer from 0 to 65535. The
default value is 443.
Authentication Credentials to Provisioning Server
User Name Specifies the username for the HTTP Provisioning
Server authentication.
The default value is empty.
User Password Specifies the password for the HTTP Provisioning
Server authentication.
the default value is empty.
Plug-and-Play (PNP) Provisioning
PNP Configuration Specifies the status of the PNP configuration.
The options are:
• Enabled (default)
• Disabled
Configuration
Table continues…
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 153
Comments on this document? infodev@avaya.com
To Next Page
Loading...
