Name Description
Configuration Server Access Mode Specifies the server access mode of the
provisioning server.
The options are:
• HTTP
• HTTPS (default)
Note:
Use HTTPS if the SIP transport mode is TLS,
otherwise, use HTTP.
Download configuration file using HTTPS only Specifies whether only HTTPS is used to download
the settings file.
The options are:
• Yes
• No (default)
Import Configuration File Enables the user to import the settings file.
To import the settings file, click Browse to browse
your local PC or any PC connected to the network.
Select the file and click Import.
Restart the phone for new parameters from the
settings file to take effect.
Export Configuration File Enables the user to export a configuration file.
To export the configuration file, click Export.
Firmware
Software Version Displays the version of the SIP software.
This field is empty by default.
Backup Software Version Displays the backup software version.
This field is empty by default.
Firmware Upgrade You can import the firmware upgrade file from a
local PC or any PC connected to the network.
To upload the firmware upgrade file, click Browse
to browse your PC, select the file and click
Upgrade.
After you click OK in the prompt, the phone
downloads the new firmware and then reboots.
Language
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 154
Comments on this document? infodev@avaya.com
To Next Page
Loading...
