Avaya J100 Series - Setting the Time

Related links
Pre-configuration of keys on page 239
PHONEKEY parameter values on page 489
Pre-configuration of keys parameter on page 240
Pre-configuration fields
On the Key Configuration tab, the following fields are available for configuring pre-determined
keys on the phone and button module.
Name Description
Key Displays the list of phone keys that can be
configured on the selected tab. The keys
corresponding to the tabs are as follows:
• Keys – 1 to 24 phone keys;
• BM 1 (25–48) – 25 to 48 keys of the first attached
button module;
• BM 2 (49–72) – 49 to 72 keys of the second
attached button module;
• BM 3 (73–96) – 73 to 96 keys of the third attached
button module.
Type Contains the types of key configuration.
The values are:
• Feature
• Application
• Line
• Autodial
• Contact
• BLF
In Asterisk and 3CX environments, if a value for the
BLF type is not set, you can add, edit and delete it.
Name Displays the values corresponding to the selected
type.
Attribute 1 The field is available when the selected type and
name of the key require setting this value.
Attribute 2 The field is available when the selected type and
name of the key require setting this value.
Label Adds the key label to the Phone screen or the
button module.
Configuring the phone using the web interface
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 171
Comments on this document? infodev@avaya.com