Avaya J100 Series - Page 189

Parameter Default value Description
RINGTONE_DEFAULT_ALTERN
ATE_NUM1
16 Specifies the index of the default
ringtone to be used when an
incoming call is from the first
alternate number. Supported only
in BroadSoft server.
The operation values range
between 1 to 18.
RINGTONE_DEFAULT_ALTERN
ATE_NUM2
17 Specifies the index of the default
ringtone to be used when an
incoming call is from the second
alternate number. Supported only
in BroadSoft server
The operation values range
between 1 to 18.
RINGTONE_DEFAULT_BLF_CA
LL_PARK
1 Specifies the index of the default
ringtone to be used when a
notification is received of a
parked call on a BLF.
The operation values range
between 1 to 18.
RINGTONE_DEFAULT_BLF_INC
OMING_CALL
1 Specifies the index of the default
ringtone to be used when a
notification is received of an
incoming call on a BLF.
The operation values range
between 1 to 18.
RINGTONE_DEFAULT_CALL_F
WD_RING
1 Specifies the index of the default
ringtone to be used when an
incoming call has been forwarded
from another phone.
The operation values range
between 1 to 18.
RINGTONE_DEFAULT_CALL_PA
RK
1 Specifies the index of the default
ringtone to be used when a
notification that a call has been
parked on the logged in
extension.
The operation values range
between 1 to 18.
Table continues…
Application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 189
Comments on this document? infodev@avaya.com