Avaya J100 Series - Page 206

Parameter Default value Description
BW_ENABLE_DIR 1 Specifies if directory contacts are
available for processing.
Operation values:
• 0: Directory contacts are not
processed and directory
sources are not displayed to the
user.
• 1: Directory contacts are
processed and directory
sources are displayed to the
user.
BW_ENABLE_DIR_ENTERPRIS
E
1 Specifies if Enterprise directory
contacts are available for
processing.
Operation values:
• 0: Enterprise directory contacts
are not processed.
• 1: Enterprise directory contacts
are processed.
BW_ENABLE_DIR_ENTERPRIS
E_COMMON
1 Specifies if Enterprise common
directory contacts are available
for processing.
Operation values:
• 0: Enterprise common directory
contacts are not processed.
• 1: Enterprise common directory
contacts are processed.
BW_ENABLE_DIR_GROUP 1 Specifies if Group contacts are
available for processing.
Operation values:
• 0: Group contacts are not
processed.
• 1: Group contacts are
processed.
Table continues…
Feature and application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 206
Comments on this document? infodev@avaya.com