Avaya J100 Series - Page 223

Name Default value Description
FORCE_HTTP_AUTH_USERNA
ME
Null Specifies the username for HTTP/
HTTPS provisioning server
authentication.
The valid value is a string of up to
255 ASCII characters without any
intervening spaces.
Double quotes (“”) must not be
used in a username string, when
you configure this parameter
through the 46xxsettings.txt
file.
The following symbols are not
supported when provisioning the
credentials with the DHCP Option
242:
• Double quote mark (“”)
• Apostrophe (’)
• Comma (,)
• Equal sign (=)
FORCE_HTTP_AUTH_PASSWO
RD
Null Specifies the password for HTTP/
HTTPS provisioning server
authentication.
The valid value is a string of up to
255 ASCII characters without any
intervening spaces.
Double quotes (“”) must not be
used in password string, when
you configure this parameter
through the 46xxsettings.txt
file.
The following symbols are not
supported when provisioning the
credentials with the DHCP Option
242:
• Double quote mark (“”)
• Apostrophe (’)
• Comma (,)
• Equal sign (=)
Feature configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 223
Comments on this document? infodev@avaya.com