Avaya J100 Series - Page 228

Parameter name Default value Description
DIRENABLED_PlATFORM 0 Determines whether the LDAP
directory search and application
are enabled on the phone.
Value operation:
• 0: No
• 1: Yes
DIRUSERNAME Null Specifies the LDAP client
username.
The following characters are
allowed:
• 0–9
• a-z
• A-Z
The preferred way of configuring
this parameter is through the web
interface.
DIRPASSWORD Null Specifies the LDAP client
password.
The following characters are
allowed:
• 0–9
• a-z
• A-Z
The preferred way of configuring
this parameter is through the web
interface.
DIRSRVR Null Specifies the IP address or a fully
qualified domain name (FQDN) of
the LDAP directory server.
The valid value is an IPv6 or IPv4
address in the dotted decimal
format or a FQDN.
For example,
SET DIRSRVR 192.168.161.54
or
SET DIRSRVR domain.com
Table continues…
Feature and application configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 228
Comments on this document? infodev@avaya.com