• Sends the backup file to the server.
If the automatic backup process fails, the phone displays the following message:
Backup Failed
Note:
The default value of the credentials and realm are set to null in the following cases:
• At the time of manufacturing.
• When the phone is reset to factory default.
• When user-specific data is removed from the phone.
• Backup process is only initiated when there is a successful retrieval of the user-specific
data.
Restore process
• HTTP server requests the file.
• The phone sends the backup file.
• HTTP server returns the file to the phone.
If the automatic restore process fails, the phone displays the following message:
Retrieval Failed
Backup and restore process
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 285
Comments on this document? infodev@avaya.com
To Next Page
Loading...
