Avaya J100 Series - Page 295

Parameter name Default value Description
AGCSPKR 1 Specifies the status of
Automatic Gain Control
(AGC) for the speaker.
Value operation:
• 0: Disables AGC for the
speaker.
• 1: Enables AGC for the
speaker.
ALLOW_BLF_LIST_CHANGE 3 Specifies whether a user
can add or delete the
monitored phone
extensions from the BLF
resource list.
Note:
This parameter is
supported only in the
Broadworks
environment. Avaya
J129 IP Phone does
not support this
feature.
Value operation:
0: The user cannot add or
delete monitored phone
extensions.
1: The user can only
delete monitored phone
extensions.
2: The user can only add
monitored phone
extensions.
3: The user can add and
delete monitored phone
extensions.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 295
Comments on this document? infodev@avaya.com