Avaya J100 Series - Page 294

Parameter name Default value Description
ADMINTIMEFORMAT 0 Specifies whether
TIMEFORMAT value is
forced or a user can
change the time format in
user interface.
Value operation:
• 0: AM/PM format, user
can change time format.
• 1: 24 hour format, user
can change format.
• 3: forced AM/PM format.
• 1: forced 24 hour format.
Note:
IP Office CCMS
environment does not
support this
parameter.
AGCHAND 1 Specifies the status of
Automatic Gain Control
(AGC) for the handset.
Value operation:
• 0: Disables AGC for the
handset.
• 1: Enables AGC for the
handset.
AGCHEAD 1 Specifies the status of
Automatic Gain Control
(AGC) for the headset.
Value operation:
• 0: Disables AGC for the
headset.
• 1: Enables AGC for the
headset.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 294
Comments on this document? infodev@avaya.com