Avaya J100 Series - Page 293

Parameter name Default value Description
ACOUSTIC_EXPOSURE_PROTECT_MODE_DEFAULT Off Specifies the long-term
acoustic exposure
protection mode default
setting.
Value operation:
• Off
• Dynamic:
• 4 hours
• 8 hours
Note:
Avaya J129 IP Phone
does not support
long-term acoustic
exposure protection.
ADMIN_LOGIN_ATTEMPT_ALLOWED 10 Specifies the allowed
number of failed attempts
for accessing the Admin
menu.
ADMIN_LOGIN_LOCKED_TIME 10 Specifies the duration for
lockout when a user
reaches the maximum
attempts limit for
accessing the Admin
menu.
Valid values are from 5
min to 1,440 min.
ADMIN_PASSWORD 27238 Specifies an access code
for accessing the Admin
menu.
Valid values are from 6 to
31 alphanumeric
characters.
Note:
If this parameter
length is set below 6
or above 31
alphanumeric
characters, then the
parameter is treated
as not defined.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 293
Comments on this document? infodev@avaya.com