Avaya J100 Series - Page 298

Parameter name Default value Description
AUDIOPATH 1 Specifies the audio path
for the phone.
Value operation:
• 1: For speaker.
• 2: For headset.
AUDIOSTHD 0 Specifies the level of side-
tone in the headset.
Value operation:
• 0: Normal
• 1: Softer by one level.
• 2: Softer by two levels.
• 3: Softer by three levels.
• 4: OFF.
• 5: Louder by one level.
Note:
Avaya J159 IP Phone
and Avaya J169/J179
IP Phone supports
this feature.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 298
Comments on this document? infodev@avaya.com