Avaya J100 Series - Page 299

Parameter name Default value Description
AUDIOSTHS 0 Specifies the level of side-
tone in the handset.
Value operation:
• 0: Normal
• 1: Softer by three levels.
• 2: OFF.
• 3: Softer by one level.
• 4: Softer by two levels.
• 5: Softer by four levels.
• 6: Softer by five levels.
• 7: Softer by six levels.
• 8: Louder by one level.
• 9: Louder by two levels.
Note:
Avaya J159 IP Phone
and Avaya J169/J179
IP Phone supports
this feature.
AUTH 0 Specifies if the script files
are to be downloaded from
an authenticated server
over an HTTPS link.
Value operation:
• 0: Optional
• 1: Mandatory
To revert the configured
value of 1 to the default
one, reset the phone to
defaults.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 299
Comments on this document? infodev@avaya.com