Avaya J100 Series - Page 312

Parameter name Default value Description
BS_CC_UNAVAIL_CODES Null Specifies codes that can
be selected when an
agent selects Unavailable
state. This parameter is
used only if XSI is
disabled (XSI_URL is
empty).
You can enter the comma
separated list of the
reason codes and their
descriptions as shown
here: code = description,
example: 1= coffee break,
2= Tea party, dnd= Do Not
Disturb
Note:
Avaya J129 IP Phone
does not support this
feature.
BS_CC_AUTOMATIC_STATE 0 Specifies if the phone
automatically changes the
agent state during logging
in and logging out.
Options are:
• 0: To disable the
parameter.
• 1: To enable the
parameter.
Note:
Avaya J129 IP Phone
does not support this
feature.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 312
Comments on this document? infodev@avaya.com