Parameter name Default Value Description
ENABLE_3PCC_ENVIRONMENT 1 Specifies whether the deployment
environment is an Open SIP
server.
Value operation:
• 0: Avaya environment.
• 1 (Default): Open SIP
environment.
3PCC_SERVER_MODE 0 Specifies if the phone expects a
generic Open SIP server or a
BroadSoft server (applicable
when
ENABLE_3PCC_ENVIRONMENT
is set to 1).
Value operation:
• 0 (Default): Generic.
• 1: BroadSoft.
ENABLE_OOD_RESET_NOTIFY 0 Specifies whether the phone
supports Out Of Dialog (OOD)
SIP NOTIFY message with
Event:resync or Event:check-sync
only.
Value operation:
• 0 (Default): OOD is not
supported.
• 1: OOD is supported.
To support Broadsoft Device
Management, this value should
be set to 1.
Table continues…
Open SIP operation modes
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 44
Comments on this document? infodev@avaya.com
To Next Page
Loading...
