Parameter name Default value Description
STUN_UDP_MAX_TRANSMISSIONS 7 Sets the number of times
the phone will transmit a
STUN Request until a
Response is received,
after which the Request
will be treated as failed.
Valid values are positive
integers from 1 to 7.
STUN_UDP_MAX_MEDIA_TRANSMISSIONS 3 Specifies the number of
times the phone transmits
a STUN Request to get
NAT bindings for the
phone’s RTP or RTCP IP
address and ports.
Retransmissions continue
until a response is
received, or until the total
number of requests has
been sent.
Initial timeout, in
milliseconds, to wait for a
Response to a STUN
Request sent over UDP
for media is 500 msec.
The timeout value is
internally doubled after
each (re)transmission.
Valid values are 1 through
4.
SUBSCRIBE_LIST_NON_AVAYA Null Specifies comma
separated list of event
packages to subscribe to
after registration.
Possible values are: reg,
dialog, mwi, ccs,
message-summary which
is identical to mwi, avaya-
ccs-profile which is
identical to ccs. The
values are case
insensitive.
For IPO the recommended
value shall be reg,
message-summary,
avaya-ccs-profile.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 463
Comments on this document? infodev@avaya.com
To Next Page
Loading...
