Avaya J100 Series - Page 466

Parameter name Default value Description
SYSLOG_LEVEL 4 Specifies the severity level
of syslog messages.
Events with the selected
severity level and above
will be logged. the lower
numeric severity values
correspond to higher
severity levels.
Value operation:
• 3: Error, Critical, Alert
and Emergency events
are logged
• 4: Warning, Error,
Critical, Alert and
Emergency events are
logged (Default)
• 5: Notice, Warning,
Error, Critical, Alert and
Emergency events are
logged
• 6: Informational, Notice,
Warning, Error, Critical,
Alert and Emergency
events are logged.
• 7: Debug, Informational,
Notice, Warning, Error,
Critical, Alert and
Emergency events are
logged.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 466
Comments on this document? infodev@avaya.com