Avaya J100 Series - Page 468

Parameter name Default value Description
TEAM_BUTTON_REDIRECT_INDICATION 0 Specifies if the redirection
indication must be shown
on a team button on the
monitored station, if it is
not a redirect destination
of the monitored station.
Value operation:
0: Disabled. The redirect
indication is shown only on
a monitoring station which
is redirection destination.
1: Enabled. The
redirection indication is
displayed on all monitoring
stations
Note:
Avaya J129 IP
Phoneand Avaya
J139 IP Phone do not
support Team Button
feature.
TEAM_BUTTON_RING_TYPE 1 Specifies the alerting
pattern to use for team
buttons.
Valid values are 1 through
8. The default value is 1.
Note:
Avaya J129 IP
Phoneand Avaya
J139 IP Phone do not
support Team Button
feature.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 468
Comments on this document? infodev@avaya.com