Avaya J100 Series - Page 474

Parameter name Default value Description
USE_EXCHANGE_CALENDAR 0 Specifies whether the
Calendar synchronizes
with the Microsoft
Exchange.
Value operation:
• 0: To disable
synchronization.
• 1: To enable
synchronization.
USE_QUAD_ZEROES_FOR_HOLD 0 Specifies how Hold will be
signaled in SDP.
Value operation:
• 1: “a=directional
attributes" will be used
• 0: "c=0.0.0.0" will be
used
USER_STORE_URI Nulll Specifies the URI path of
IP Office for storing user
data.
Note:
If the value of this
parameter is set to
null, then the
addition, deletion,
and modification of
Contacts is disabled.
UUIDISPLAYTIME 10 Specifies the duration, in
seconds, that the UUI
Information screen is be
displayed.
Valid values are from 5 to
60.
Note:
Avaya J129 IP
Phoneand Avaya
J139 IP Phonedo not
support this feature.
V
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 474
Comments on this document? infodev@avaya.com