Avaya J100 Series - Page 478

Parameter name Default value Description
WAIT_FOR_UNREGISTRATION_TIMER 32 Specifies the number of
seconds the phone waits
before assuming that an
un-registration request is
complete.
Un-registration includes
termination of registration
and all active dialogs.
Valid values are 4 through
3,600.
WARNING_FILE Null Specifies the file name or
URL for a custom single-
channel WAV file coded in
ITU-T G.711 u-law or A-
law PCM with 8-bit
samples at 8kHz to be
used as a call recording
warning instead of the
built-in English warning.
The value can contain 0 to
255 characters.
WBCSTAT 1 Specifies whether a
wideband codec indication
is displayed when a
wideband codec is used.
Value operation:
0: Disabled
1: Enabled
Note:
J129 does not
support this
parameter
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 478
Comments on this document? infodev@avaya.com