Parameter name Default value Description
WEB_ADMIN_PASSWORD 27238 Specifies the password to
access the phone through
a web browser as an
administrator.
The value set from the
web server interface has a
higher priority than that of
the Settings file.
If the Web admin
password is changed
using the web server, then
the web admin password
set through settings file is
not used until either the
web admin password is
set to default through the
phone admin menu or the
phone is reset to default.
Valid values are from 8 to
31 alphanumeric
characters including
upper, lower and special
characters.
WEB_HTTP_PORT
80 Specifies the port on
which the Web Server
running on the phone will
be accessed using HTTP.
Valid values are 0, 80,
1024 to 65,535.
WEB_HTTPS_PORT 443 Specifies the port on
which the Web Server
running on the phone will
be accessed using
HTTPS.
Valid values are 443, 1024
to 65,535.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 479
Comments on this document? infodev@avaya.com
To Next Page
Loading...
