Avaya J100 Series - Page 480

Parameter name Default value Description
WEBSERVER_ON_HTTP 0 Specifies whether HTTP
access to the web server
is enabled or disabled.
Value operation:
• 0: Web Server is not
accessible through
HTTP.
• 1: Web Server is
accessible through
HTTP.
WLAN_MAX_AUTH_FAIL_RETRIES 3 Specifies the number of
times the phone will retry a
secure connection upon
receiving (possibly
successive) auth failures.
The valid values range
from 0 to 4.
WMLEXCEPT Null Specifies zero or more IP
addresses or domains for
which the HTTP proxy
server specified by
WMLPROXY will not be
used.
The values are separated
by commas without any
intervening spaces.
The value can contain up
to 255 characters.
Only Avaya J169/J179 IP
Phones support this
parameter.
Table continues…
Customizable parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 480
Comments on this document? infodev@avaya.com