Avaya J100 Series - Page 481

Parameter name Default value Description
WMLHOME Null Specifies the URL of a
WML page to be displayed
by default in the WML
browser and if the Home
soft key is selected in the
browser.
The allowed value
contains not more than
one URL of up to 255
characters.
Note:
If the value is set to
default, the WML browser
is disabled.
Only Avaya J169/J179 IP
Phones support this
parameter.
WMLIDLETIME 10 Specifies the idle time in
minutes after which the
web page set as the value
of WMLIDLEURI will be
displayed.
The allowed value is a
positive integer from 1 to
999.
Note:
If WMLIDLEURI is
set to null, the web
page will not be
displayed when the
phone is idle.
Only Avaya J169/J179 IP
Phones support this
parameter.
Table continues…
List of configuration parameters
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 481
Comments on this document? infodev@avaya.com