Avaya J100 Series - Adding Another Party Without Using Hold; Viewing Conference Details

4. Select IP Configuration > Ethernet IPv4.
The phone displays the parameters for IP configuration.
IP configuration field description
Configuration Parameter Name Description
The following parameters are available in Ethernet IPv4 menu:
Use DHCP Specifies the access to view or manually enter the
IP address.
Select one of the following:
• YES: Selects the DHCP option to view the IP
addresses.
• No: Selects the DHCP option to enter the IP
addresss.
Phone Specifies the IP address of the phone. The
available format is nnn.nnn.nnn.nnn.
Gateway Specifies the gateway of the phone. The available
format is nnn.nnn.nnn.nnn.
Mask Specifies the network mask. The available format is
nnn.nnn.nnn.nnn.
The following parameters are available in VLAN menu:
802.1Q Choose one of the following options:
• Auto: Automatic mode.
• On: Turns on the configuration.
• Off: Turns off the configuration.
VLAN ID Specifies the ID for VLAN. The available format is
dddd.
VLAN Test Specifies the time in seconds, the phone waits for
the DHCP server response. The available format is
ddd.
The following parameters are available in the Servers menu:
HTTP server Specifies the IP address of the HTTP file server.
The available format is nnn.nnn.nnn.nnn.
HTTPS server Specifies the IP address of the HTTPS file server.
The available format is nnn.nnn.nnn.nnn.
DNS server Specifies the IP address of the DNS server. The
available format is nnn.nnn.nnn.nnn.
SNTP server Specifies the time server settings.
STUN server Specifies the STUN server settings.
Table continues…
Phone configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 80
Comments on this document? infodev@avaya.com