Setting Description Associated Configuration
Parameter
DNS server The IP address of the DNS server
that the phone accessed before
successfully.
DNSSRVR_IN_USE
SNTP server The list of addresses of SNTP
servers.
SNTPSRVR
STUN server On the Avaya J129 IP Phone,
displays the address of the STUN
server. If the STUN server is not
configured, or the resolution
through the DNS server has
failed, the 0.0.0.0 value is
displayed.
On the Avaya J139 IP Phone and
Avaya J169/J179 IP Phones,
press Select to view more details.
STUN_SERVER_ADDRESS
Product ID The device ID of the phone.
IP Office mode The status of the IP Office mode
setting (Disabled/Enabled).
Device type The default device type of the
phone.
Server type The default server type of the
phone.
Viewing the STUN server details
The STUN server menu contains the following information:
Field name
Description
Status The current status of the STUN server. The possible statuses are:
• Active: displayed in the following cases:
- The STUN server is configured as an IP address.
- The STUN server is configured as a Fully Qualified Domain Name (FQDN),
and it can be resolved through the DNS server.
• Failed: displayed when the STUN server is configured, but the resolution
through the DNS server has failed. The possible reason might be that the
DNS server is not available or the FQDN is incorrect.
• Not configured: displayed when the STUN server is not configured.
Address The IP address of the STUN server. For example, 10.10.10.1.
If the STUN server is not configured, or the resolution has failed, the value of
0.0.0.0 is displayed.
Table continues…
Configuring the phone using Administration menu
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 91
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
