Baumer VCXG Series - Colortransformationresettofactorylist; Colortransformationvalue; Colortransformationvalueselector

V4.7 | 06/24/2024 | 11165414
101
7.5.5 ColorTransformationResetToFactoryList
Resets the ColorTransformation to the selected ColorTransformationFactoryList.
Name ColorTransformationResetToFactoryList
Category ColorTransformationControl
Interface ICommand
Access Write only
Unit -
Values -
7.5.6 ColorTransformationValue
Represents the value of the selected Gain factor inside the Transformation matrix.
Name ColorTransformationValue
Category ColorTransformationControl
Interface IFloat
Access Read only
Unit -
Values -8.0 – 8.0 (Increment: 1.00)
7.5.7 ColorTransformationValueSelector
Selects the Gain factor of the Transformation matrix to access in the selected Color Trans-
formation module.
Name ColorTransformationValueSelector
Category ColorTransformationControl
Interface IEnumeration
Access Read / Write
Unit -
Values
▪ Gain00
▪ Gain01
▪ Gain02
▪ Gain10
▪ Gain11
▪ Gain12
▪ Gain20
▪ Gain21
▪ Gain22