Baumer VCXG Series - Category: Bocalibrationdata; Bocalibrationangularaperture; Bocalibrationdataconfigurationmode; Bocalibrationdatasave

V4.7 | 06/24/2024 | 11165414
221
7.18 Category: boCalibrationData
Category for functions of calibration data.
Notice
Calibration setting
Calibration is not in the camera and either via Camera Explorer. Enter here the cate-
gory param-eters to be determined in the application environment by external software
(e.g. OpenCV). This calibration data is saved non-volatile to the camera.
For calibration, the camera provides image together with stored calibration data. Cali-
bration must be performed using external software.
7.18.1 boCalibrationAngularAperture
Angular lens aperture as the angular lens size as seen from the focal point in degrees.
Name boCalibrationAngularAperture
Category boCalibrationData
Interface IFloat
Access Read / Write
Unit °
Values 0.000000 … 360.000000 (Increment: 1.00)
7.18.2 boCalibrationDataCongurationMode
Controls whether boCalibrationDataCongurationMode is active.
Name boCalibrationDataCongurationMode
Category boCalibrationData
Interface IEnumeration
Access Read / Write
Unit -
Values
O󰀨 Disables boCalibrationDataCongurationMode.
On Enables boCalibrationDataCongurationMode.
7.18.3 boCalibrationDataSave
Save the current calibration data to the non-volatile device memory.
Name boCalibrationDataSave
Category boCalibrationData
Interface ICommand
Access Write only
Unit -
Values -