Baumer VCXG Series - Dynamicpixelcorrectionenable; Dynamicpixelcorrectionfactor; Dynamicpixelcorrectionthreshold

V4.7 | 06/24/2024 | 11165414
180
7.12.1 DynamicPixelCorrectionEnable
Enables dynamic pixel correction. .
DynamicPixelCorrection = O󰀨 DynamicPixelCorrection = On
Name DynamicPixelCorrectionEnable
Category ImageProcessingControl
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (O󰀨)
7.12.2 DynamicPixelCorrectionFactor
Sets the factor for dynamic pixel correction. The pixel is adapted to its surroundings by
this set factor.
Notice
Set up the ambient conditions (lighting) as in the planned application. Select the settings
so that only the desired pixels in the image are corrected.
Name DynamicPixelCorrectionFactor
Category ImageProcessingControl
Interface IFloat
Access Read / Write
Unit -
Values 1.0 ... 2.5 (Increment: 0.5)
7.12.3 DynamicPixelCorrectionThreshold
Sets the threshold value from which deviation from its surroundings a pixel is evaluated
as a pixel to be corrected.
Notice
Set up the ambient conditions (lighting) as in the planned application. Select the settings
so that only the desired pixels in the image are corrected.
Name DynamicPixelCorrectionThreshold
Category ImageProcessingControl
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 255 (Increment: 1)