Baumer VCXG Series - Gevprimaryapplicationipaddress; Gevprimaryapplicationsocket; Gevprimaryapplicationswitchoverkey; Gevscda

V4.7 | 06/24/2024 | 11165414
203
7.16.2.26 GevPrimaryApplicationIPAddress
Returns the address of the primary application.
Name GevPrimaryApplicationIPAddress
Category
TansportLayerControl → GigEVision
Interface IInteger
Access Read only
Unit -
Values ≥ 0
7.16.2.27 GevPrimaryApplicationSocket
Returns the UDP source port of the primary application.
Name GevPrimaryApplicationSocket
Category
TansportLayerControl → GigEVision
Interface IInteger
Access Read only
Unit -
Values ≥ 0
7.16.2.28 GevPrimaryApplicationSwitchoverKey
Controls the key to use to authenticate primary application switchover requests.
Name GevPrimaryApplicationSwitchoverKey
Category
TansportLayerControl → GigEVision
Interface IInteger
Access Write only
Unit -
Values ≥ 0
7.16.2.29 GevSCDA
Controls the destination IP address of the selected stream channel to which a GVSP
transmitter must send data stream or the destination IP address from which a GVSP re-
ceiver may receive data stream.
Name GevSCDA
Category
TansportLayerControl → GigEVision
Interface IInteger
Access Read / Write
Unit -
Values ≥ 0