Baumer VCXG Series - Gevscpsdonotfragment; Gevscpsfiretestpacket; Gevscpspacketsize; Gevscsp

V4.7 | 06/24/2024 | 11165414
205
7.16.2.34 GevSCPSDoNotFragment
The state of this feature is copied into the "do not fragment" bit of IP header of each
stream packet. It can be used by the application to prevent IP fragmentation of packets
on the stream channel.
Name GevSCPSDoNotFragment
Category
TansportLayerControl → GigEVision
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (O󰀨)
7.16.2.35 GevSCPSFireTestPacket
Sends a test packet. When this feature is set, the device will re one test packet.
Name GevSCPSFireTestPacket
Category
TansportLayerControl → GigEVision
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (O󰀨)
7.16.2.36 GevSCPSPacketSize
Species the stream packet size, in bytes, to send on the selected channel for a GVSP
transmitter or species the maximum packet size supported by a GVSP receiver.
Name GevSCPSPacketSize
Category
TansportLayerControl → GigEVision
Interface IInteger
Access Read / Write
Unit Byte
Values 576 ... 16110 (Increment: 2)
7.16.2.37 GevSCSP
Indicates the source port of the stream channel.
Name GevSCSP
Category
TansportLayerControl → GigEVision
Interface IInteger
Access Read only
Unit -
Values ≥ 0