Baumer VCXG Series - Acquisitionstart; Acquisitionstatus; Acquisitionstatusselector

V4.7 | 06/24/2024 | 11165414
67
7.3.6 AcquisitionStart
Once image acquisition has started, the camera processes the images in three steps:
▪ Determining the current set of image parameters
▪ Sensor exposure
▪ Readout from the sensor.
This process is then repeated until the camera is stopped.
Notice
Certain settings which a󰀨ect the image format can only be adjusted if the camera is
stopped.
This includes:
▪ PixelFormat
▪ Region of Interest (O󰀨setX / O󰀨setY / Width / Height)
Name AcquisitionStart
Category AcqusitionControl
Interface ICommand
Access Write only
Unit -
Values -
7.3.7 AcquisitionStatus
Reads the state of the internal acquisition signal selected using AcquisitionStatusSelec-
tor.
Name AcquisitionStatus
Category AcquisitionControl
Interface IBoolean
Access Read only
Unit -
Values
true = 1 (On)
false = 0 (O󰀨)
7.3.8 AcquisitionStatusSelector
Selects the internal acquisition signal to read using AcquisitionStatus.
Name AcquisitionStatusSelector
Category AcqusitionControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Acquisition Active
Device is currently doing an acquisition of one
or many frames.
Acquisition Trigger Wait
Device is currently waiting for a trigger for the
capture of one or many frames.